Zecheng shared the working principle and test procedures of the ESD access control system

Zecheng shared the working principle and test procedures of the Esd Access Control System
Guangdong Zecheng Intelligent Technology Co., Ltd. is an ion fan manufacturer engaged in the development, production and sales of Face Recognition, Esd Access Control systems, and wristband online monitors. It provides the working principles and test procedures of ESD Access Control systems:

The working principle of the ESD access control system is that the tester gives an identification signal to the card clock when testing the employees. After the card clock is processed, the card clock gives a control signal to the three gates for the employees to enter.

ESD access control system test operation process
1. Put on electrostatic clothes, electrostatic shoes, electrostatic wristband, electrostatic cap and other related electrostatic items first. Then walk to the three-roll gate.
2. Wear an electrostatic wristband at the entrance and exit credit card, and then swipe the card. Then touch the contact test key with your hand, when the three PASS etc. are all on, the indicator light of the three roller gate panel turns green and push the rod in the direction of the arrow to pass.
3. Preparation for the test: the test staff must stand on the foot pedal (on) to prepare for the test item, and the feet must stand in the middle of the footprints
4. If you need to test the anti-static wrist strap, please insert the wrist strap test hole on the tester.
5. Place the ID (IC) card on your body close to the card swiping device, and the electrostatic controller will automatically read the information on the card
6. Touch your finger on the test button and watch the required test items displayed on the LCD display, check the name, department, job number or photo and other information. (The longest test time is 0--5S adjustable, if it exceeds 5S, you must re-swipe the card and test again).
7. If the test item is qualified according to the card, the system will automatically open the gate and the tester will enter; if the test result is unqualified, check your wrist strap or electrostatic shoes according to the test result, the LCD screen and the electrostatic tester will display the test result intuitively And the reason for failure.
8. After the test, you can also directly watch the gate traffic indicator. After the bright green arrow is marked, it means that the test is successful and the gate has been opened and you can pass.