Three modes of anti-static access control system

1. Off-type Esd Access Control (three roller gates, wing gates, swing gates, barrier-free passages, air showers and other equipment can be used)
The electrostatic tester does not need to swipe the card to directly perform the electrostatic project test, and the test is successful and the door can be opened to enter the workshop. No entry and exit credit card test record query, fast traffic.
2. Networked ESD Access Control (three roller gates, wing gates, swing gates, barrier-free passages, air showers and other equipment can be used)

The static management software first registers the test items of the employee card (name, department, test item (testing only the hands, only the shoes and shoes on the same side without the test card), etc.), and the tester takes the registered card and swipes the card at the gate , And then test according to the registered test items. If the test is successful, you can open the door and enter the workshop. If the test fails, the gate will not open (replace the shoes or wrist strap according to the unqualified result of the test item). The static management software can record the tester’s entry and exit time Records of channels, test items, test results, name and department, etc.

3. Networked ESD access control + LCD display (three roller gates, wing gates, swing gates, barrier-free passages, air showers and other equipment can be used)
Integrated 8-inch LCD liquid crystal display on the basis of networked ESD access control. After swiping the card, it can display the name, card number, event test items, results and other information.