Guangdong Zecheng Intelligent Technology Co., Ltd

quentin@zecheng.com.cn

86-0769-39020536

Home> Industry Information> The working principle and test procedure of ESD access control system

The working principle and test procedure of ESD access control system

July 22, 2021

The working principle of Esd Access Control System

The working principle of the Esd Access Control system is that the tester gives an identification signal to the card clock when testing the employees. After the card clock is processed, the card clock gives a control signal to the three gates for employees to enter.

ESD control testing system

ESD Access Control system test operation process
1. First, put on electrostatic clothes, electrostatic shoes, electrostatic bracelet, electrostatic cap and other related electrostatic objects. Then go to the three roller gate
2. Wear an electrostatic wristband at the entrance and exit credit card, and then swipe the card. Then touch the contact test key with your hand. When the three PASS etc. are all on, the indicator light of the three roller gate panel turns green and push the rod in the direction of the arrow to pass.
3. Preparing for the test work: the test staff must stand on the foot pedal (on) to prepare for the test item, and the feet must stand in the middle of the footprints
4. If you need to test the anti-static wrist strap, please insert the wrist strap test hole on the tester.
5. Place the ID (IC) card on your body close to the card swiping device, and the electrostatic controller will automatically read the information on the card
6. Touch your finger on the test button, watch the required test items displayed on the LCD display, check the name, department, job number or photo and other information. (The longest test time is 0--5S adjustable, if it exceeds 5S, you must re-swipe the card and test again).
7. If the test item is qualified according to the card test, the system will automatically open the gate and the tester will enter; if the test result is unqualified, check your wrist strap or electrostatic shoes according to the test result, the LCD screen and electrostatic tester will display the test result intuitively And the reason for failure.
8. After the test, you can also directly watch the gate traffic indicator. The bright green arrow indicates that the test is successful and the gate has been opened and you can pass.

The above is the The working principle and test procedure of ESD access control system we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Home> Industry Information> The working principle and test procedure of ESD access control system

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send