Regarding electrostatic ESD protection, how can we avoid losses

The principle of dealing with static electricity is similar to the principle of controlling infectious diseases. It is nothing more than controlling the source of static electricity, cutting off the transmission path, and enhancing the antistatic ability of the equipment itself. The accumulation of static electricity does not cause any harm, but it is the moment of static discharge that causes damage. The shorter the release time, the more concentrated the energy, and the easier it is to produce damage. We can imagine a balloon, no matter how big it is, it will be fine as long as it does not burst. But when you pierce a needle, it bursts with a snap, which is a bit destructive.

In the anti-static system, the anti-static access control system is an important device to check from the source. It can detect whether the anti-static measures or equipment of each worker who enters the anti-static area is in place and qualified. In other words, before the worker enters the work area, the inspection system is used to confirm whether the worker can enter the work area, so as to avoid entering with a large amount of static electricity, which may cause product loss.

ZeCheng Esd Access Control management mode

Through the all-round monitoring of the electrostatic testing area, managers and management personnel can easily understand and grasp the use of gates and equipment operation conditions at various locations, and solve problems in time, which can effectively improve the work efficiency of management personnel. Necessary measures to improve management

1. The employee only needs to swipe his card to test the wrist strap instrument to determine the displayed resistance value, and the gate will automatically open in the OK range

2. The employee only needs to swipe the card to test the electrostatic shoes. The ZC-A10 instrument judges and displays the resistance value of the left and right feet, and the gate opens automatically in the OK range

3. The employee needs to test the electrostatic shoes and wrist strap by swiping the card. The ZC-A10 instrument displays the resistance value of the hand shoes, and the gate will automatically open in the OK range.

4. Customers and VIPs want to enter the workshop to watch, we have prepared a VIP test-free card for him, and the gate will open automatically when the card is swiped.

5. If the boss or manager wants to enter the workshop, we have also prepared a special card for you, and the gate will open automatically when you swipe the card.

6. It can be equipped with fingerprint recognition or Face Recognition before testing